SOLUTIONS
CONTACT US TODAY TO DISCUSS YOUR NEXT PROJECT
Nexans Australmold is an innovator, manufacturer and distributor of low, medium and high voltage cable accessories. Our brands also include, Euromold and GPH.
Established in Australia in 1985, we are a leading supplier to power utilities, OEM's, contractors, approved service providers, renewable energy, resources, transportation and infrastructure markets.
NEWS
Published on 09 October 2020
Nexans launches its YouTube channel dedicated to electricity: WHAT'S WATT by Nexans!
This series of videos will cover everything there is to know about electricity.
Nexans’ purpose is to share its passion for electricity and make its operation more accessible.
The series is co-hosted by Nexans scientific expert, Frédéric Lesur (high voltage products...
Published on 22 September 2020
Nexans Power Accessories has developed a new range of cable lugs based on the GPH® C-Series for all conductors operating up to 90°C and voltages up to 52 kV. The new series covers the metric conductor cross-sections from 25 mm² to 630 mm² and the North American range from AWG #2 to 1250 kcmil.
Welcome to the new Era of Heat-Shrink Joints
Nexans Power Accessories has released a new series of joints adapted to meet Australian/New Zealand standards.
The JTS series straight cable joints use a new triple layer heat shrink tubing with integrated stress control field, insulating and conductive...
Published on 17 November 2020
ARCHIVE
SERVICES
CABLE LEAD
Nexans factories have been assembling cable leads since 1975 in Germany, with facilities now in the UK, Belgium, Italy, Germany, France, South Africa and China.
This experience, knowledge and knowhow was transferred to Nexans Australmold in 2015 to begin local assembly of custom cable leads and jumpers in Melbourne, using proven cable accessories supplied by Nexans Australmold and Nexans cable enabling a total Nexans end to end solution.
TESTING
Our local testing laboratory was commissioned in 2017 for cable leads, which has the capability for Megger testing to 10kV, High Potential (AC Withstand) to 100kV and Partial Discharge (PD).
Our testing also supports full traceability of components on each individual cable lead with sequential serial number labelling.
TRAINING
A full range of standard or customized training modules are available:
CONTACT US
HEAD OFFICE
Hours: 08:30 AM - 04:30 PM Monday - Friday
Address: Building 2, 69 Dalton Road, Thomastown VIC 3074 Australia
Email: sales@australmold.com.au
Phone: +61 3 9205 8400
ENQUIRY FORMS
Please complete the interactive form, save, then email.
1 - Head Office, Melbourne , Australia
Nexans Australmold
Building 2, 69 Dalton Road,
Thomastown, VIC 3074
Tel: +61 3 9205 8400
2 - Branch Office, Western Australia
Nexans Australmold
857 Abernethy Road,
Forrestfield, WA 6058
Tel: 0409 910 146
3 - Branch Office, Queensland
Nexans Australmold
541 Bilsen Rd,
Geebung, QLD 4034
Tel: 0439 032 151
4 - New Zealand Distributor
22 Fischer Crescent,
Mt Wellington, Auckland
Tel: +64 9 928 1000
CABLE LEAD
Nexans factories have been assembling cable leads since 1975 in Germany, with facilities now in the UK, Belgium, Italy, Germany, France, South Africa and China.
This experience, knowledge and knowhow was transferred to Nexans Australmold in 2015 to begin local assembly of custom cable leads and jumpers in Melbourne, using proven cable accessories supplied by Nexans Australmold and Nexans cable enabling a total Nexans end to end solution.
TESTING
Our local testing laboratory was commissioned in 2017 for cable leads, which has the capability for Megger testing to 10kV, HI Pot (AC Withstand) to 100kV and Partial Discharge (PD).
Our testing also supports full traceability of components on each individual cable lead with sequential serial number labelling.
TRAINING
A full range of standard or customized training modules are available:
CONTACT US TODAY TO DISCUSS YOUR NEXT PROJECT
CABLE LEAD
TESTING
TRAINING
CABLE LEAD
Nexans factories have been assembling cable leads since 1975 in Germany, with facilities now in the UK, Belgium, Italy, Germany, France, South Africa and China.
This experience, knowledge and knowhow was transferred to Nexans Australmold in 2015 to begin local assembly of custom cable leads and jumpers in Melbourne, using proven cable accessories supplied by Nexans Australmold and Nexans cable enabling a total Nexans end to end solution.
TESTING
Our local testing laboratory was commissioned in 2017 for cable leads, which has the capability for Megger testing to 10kV, HI Pot (AC Withstand) to 100kV and Partial Discharge (PD).
Our testing also supports full traceability of components on each individual cable lead with sequential serial number labelling.
TRAINING
A full range of standard or customized training modules are available: