The Nexans MONO Terminations are a one tube solution on XLPE insulated polymeric cables with copper wire or copper tape screens. They consist of a dual-wall tube that has an inner stress control and outer anti-tracking layer.
Published on 01 November 2018
This design enables an easy and quick install, reducing installation time and errors.
MONOi (Indoor) and MONOe (Outdoor) versions available
Product range available for single and three core cables
Accommodate cable up to 630mm²
Available with either crimp or mechanical shear off lugs
Available in 12kV, 24kV, 36kV & 42kV
Separate kit for armoured cables available
Compact overall length compared to older technologies
Type Tested to Cenelec HD 629.1 S2 and AS4805.1
200kV BIL Rated
Typical applications include installations were space is limited like compact switchgear.
Nexans launch an innovative compact interface “A” 250 amp connector for Medium Voltage equipment.
Nexans Australmold have released to the market the latest MV connector development from their Nexans Euromold factory in Belgium.
Published on 13 March 2018
The 200LR and 200SR are the new interface “A” connectors designed, engineered and manufactured by Nexans. They have all the advantages you expect from the EUROMOLD® product line: sturdy EPDM connectors with a tough 3 mm thick semi-conductive screen, quality and reliability assured by an automated production process and 100% factory testing. These new separable elbows and straight connectors are designed to connect XLPE and EPR Medium Voltage cables to equipment. Typical applications are connecting to distribution transformers, switchgear and motors. These connectors are available up to 24kV 250amp, suitable for cables up to 95mm ².
Easy to install
One size fits all
The new Interface “A” connectors are backwards compatible to the industry standard and the smallest footprint when installed, to accommodate the latest compact equipment clearances.
Nexans Australmold also supply these connectors installed on cable as custom pre-assembled cable leads from our Melbourne test and assembly facility.
For further information see our 200LR dedicated website: www.200-lr.com
CUSTOM PRE-ASSEMBLED MV CABLE LEADS
Nexans Australmold have recently relocated to a larger premises and have invested in the capability to assemble and test, pre-assembled cable leads made to order.
Pre-assembled cables are polymeric insulated medium voltage cables, equipped with connectors and/or terminations. Typical applications are to connect transformers and switchgear in substations.
Published on 13 October 2016
Custom, ready-to-install cable leads are available equipped with interface A to F connectors and terminations (Heat Shrink, Cold Shrink or Slip on). Cable types available are standard MV XLPE and Class 5 EPR Flexible cables, when smaller bending radius is needed. Customers just need to specify connector/termination type, cable type and length and we will take care of the rest – assembled and tested. Testing options available include megger, AC withstand and partial discharge. Customers can be confident they are dealing with the manufacture directly as we use Nexans cable and Nexans power accessories.
With many years of local experience in Australia and New Zealand, we have logistics, engineering, training, testing and assembly capability to help you deliver your project on time.